BJ Series Land Cruiser specifications

LAND CRUISER BJ SPECIFICATIONS



	Dimensions


	Wheelbase		2,400mm


	Overall length, with front bumper (OAL)		3,793mm



	C/1 of rear axle to end of frame (AF)		813mm


	Bumper to center of front axle (BA)		580mm



	Turning radius		5,500mm


	Tread - front wheels		1,390mm



	Tread - rear wheels		1,350mm


	Ground clearance - front		215mm



	Ground clearance - rear		210mm


	Overall width - front (with fender end)		1,575mm

Overall width - gear (with outside of deck)		1,575mm


	Height from top to frame to ground, loaded (approximate) - front	541mm



	(approximate) - rear	616mm




	Frame Pressed steel, Girder type, 50 x 130 x 3.2m



	Engine Six cylinders, valve-in-head type, 84.1mm bore, 101.6 mm stroke. Displacement, 3,386cc; compression ratio, 6.4; Brake hp., 85 at 3,200r.p.m.; Maximum torque, 22kg-m at 1,600 r.p.m. Four steel backed, replaceable-shell, precision-type main bearings; total projected area, 91.5 sq. cm.,crank pin bearing; total projected area, 107 sq. cm. Lubrication Pressure, Splash and Jet type. Specially treated paper oil filter. Oil capacity, 4.1 qt. (4,7lt) Cooling system Centrifugal pump circulation, fin-and-tube radiator. Pump driven by V-type fan belt. Capacity, 16.7 qt. Bellows-type thermostat. Ignition 6-volt, vacuum control, full-automatic distributor. Generator 6-volt, 40-ampere, shunt-wound, belt-driven. Lights Semi-sealed-beam headlights, interchangeable with sealed-beam headlights of SAE standards.